LINCOLN RANGER 250 GXT
Why settle for less, when you can get more? TheRanger® 250 GXT has all of the Xtras you need for construction and maintenance work. This Ranger delivers XTra welding performance with 250 amps for AC or DC stick and wire welding. And, it's remote-ready for extended amperage control or AC TIG welding on aluminum with Lincoln’s optional TIG module.
The Ranger® 250 GXT generates XTra power, up to 11,000 watts peak, for lights, grinders and high amperage equipment such as Lincoln’s Pro-Cut® 55 plasma cutter. With the exclusive Lincoln enclosed case, you get XTra protection and XTra quiet operation. With the Ranger® 250 GXT, you get XTra value, without paying more.
XTra Performance!
• Rated 250 amps/25 volts for AC, DC and CV. All rated outputs at 100% duty cycle 104°F (40°C).
• Smooth AC/DC welding output for a broad range of stick electrodes, such as Lincoln® Excalibur® 7018 MR (AWS E7018) and Fleetweld® 5P+ (AWS E6010). Also capable of MIG, flux-cored, and TIG welding.
• Remote ready! 6-pin connector and local/remote switch for remote control operation. Also for AC/DC TIG Module use with foot or hand Amptrol®.
• Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling. Helps you virtually eliminate running low on fuel during critical jobs.
XTra Power!
• 11,000 Watts Peak Single-Phase AC Generator Power
- Most peak power in its class.
- Use peak power for motor starting.
• 10,000 Watts Continuous Single-Phase AC Generator Power
- Most continuous power in its class.
- For high capacity needs such as a back-up generator, powering a Pro-Cut plasma cutter or an Invertec® inverter welder.
- For lights, a grinder or other power tools.
XTra Protection!
• Engine doors provide protection and easy service access.
• Low noise at 76.4 dBA at 23 ft./7 m (100.7 dB Lwa).
• Rugged Reliability — Rangers have been subjected to an extensive testing program to ensure reliable operation in a wide variety of environmental conditions.
• Three-year Lincoln warranty on welder (engine is warranted separately by the manufacturer).
Weight: 602 lbs. (273 kgs. )
Dimensions (in) H x W x D : 36.2 x 21.5 x 42.3
Dimensions (mm) H x W x D : 920 x 546 x 1073
Welding Specifications:
|
Rated CC AC Output
Amps/Volts/Duty Cycle |
Rated CC DC Output
Amps/Volts/Duty Cycle |
Rated CV Output
Amps/Volts/Duty Cycle |
Output Range |
|
250/25/100% |
250/25/100% |
250/25/100% |
50-250A AC/DC |
Engine Specifications:
|
Engine |
Cylinders |
HP and Speed (rpm) |
Generator Output |
Fuel Type |
|
Kohler OHV Command CH23S |
2 |
23 at 60 |
11000 watts peak
10000 watts continuous |
Gas |
OTHER POPULAR CATEGORIES:
